P0759
Shift Solenoid B Electrical Intermittent
If your vehicle's onboard computer has flagged the diagnostic trouble code P0759, it refers to a detected anomaly regarding "Shift Solenoid B Electrical Intermittent". This systemic engine fault needs a targeted check before symptoms expand.
Driver's Summary
Your vehicle's computer logged P0759 after detecting a malfunction in the shift solenoid b electrical intermittent system. Drivers typically experience transmission occasionally misses 2nd or 3rd gear, check engine light when this code is active. The vehicle is usually drivable, but the root cause needs attention soon to avoid more expensive repairs down the road.
Symptoms
Transmission occasionally misses 2nd or 3rd gear, check engine light
Common Causes
- Bad connection at Shift Solenoid B
- Wiring harness shorting intermittently
- Solenoid failing under heat stress
- Dirty transmission fluid
How to Fix
- 1 Inspect and repair wiring harness
- 2 Replace Shift Solenoid B
- 3 Flush transmission fluid
- 4 Test TCM outputs
Technical Explanation
Detection of P0759 occurs when the ECM cross-references multiple sensor inputs and determines that the reported values are physically inconsistent or out-of-range. Shift solenoid circuits are monitored for both functional performance (does the transmission achieve the commanded gear ratio?) and electrical integrity (is the solenoid's resistance within the normal range of 10–40 ohms?). The MIL illuminates after the fault is confirmed on two consecutive drive cycles, and the freeze frame data captured at first detection is stored in the PCM's memory for diagnostic reference.
Is It Safe to Drive?
Medium-severity fault: the car functions but not optimally. The bad connection at shift solenoid b issue will not resolve itself and will cause measurable long-term wear. A repair in the $100–$600 range now avoids far higher costs later.
Mechanic's Pro Tip
Before replacing any component on P0759, spend 5 minutes inspecting the wiring harness and connector first — corrosion, chafed insulation, and backed-out pins cause the majority of these faults and cost nothing to fix. Use a multimeter to measure voltage drop across the connector pins under load; anything above 0.1V indicates excessive resistance that will cause intermittent failures even after replacing the sensor.
Related Fault Codes
Frequently Asked Questions
What does OBD2 code P0759 mean?
OBD2 code P0759 refers to Shift Solenoid B Electrical Intermittent. If your vehicle's onboard computer has flagged the diagnostic trouble code P0759, it refers to a detected anomaly regarding "Shift Solenoid B Electrical Intermittent". This systemic engine fault needs a targeted check before symptoms expand.
What are the most common symptoms of DTC P0759?
Drivers experiencing code P0759 typically report: Transmission occasionally misses 2nd or 3rd gear, check engine light.
Is it safe to drive with trouble code P0759 active?
Medium-severity fault: the car functions but not optimally. The bad connection at shift solenoid b issue will not resolve itself and will cause measurable long-term wear. A repair in the $100–$600 range now avoids far higher costs later.
How much does it cost to fix code P0759?
The estimated repair cost for P0759 ranges from $100 to $600 USD. Solenoid replacement: $250 - $500
Solenoid replacement: $250 - $500
Need Professional Diagnostic Assistance?
Always verify sensor signals and wiring integrity with an OBD2 scanner before purchasing replacement parts.
Explore All Powertrain Codes →